Cette page appartient aux archives web de l'EPFL et n'est plus tenue à jour.
This page belongs to EPFL's web archive and is no longer updated.

tp4 experiment 1

Hello,
We've just tried to apply the command "echo 0 > /proc/sys/net/ièv4/tcp_bic" (p.9) but the file tcp_bic wasn't present in the system (of the Workstation). Did we miss something? Can we just pass through it and continue the TP?
Thanks in advance,
The Quang.
Posted by The Quang Nguyen on Thursday 1 February 2007 at 11:04
Comments
this should (and can) be done only before you install new kernel; after that, just use the provided after_restart.sh script; ( Note: during experiment one it is possible that you have workstation booted with new kernel installed (installed and booted by some other group or even by you)), and that is fine (!), just be sure you run after_restart.sh and use increase factor of 1.
Posted by Slavisa Sarafijanovic on Thursday 1 February 2007 at 12:09
or reboot the machine and use the other kernel. see comments to post just before....
Posted by Manuel Flury on Thursday 1 February 2007 at 12:14